How to Find Out Her Ring Size Without Asking
Seven ways to get her ring size without tipping her off, from borrowing a ring to the one method that gets it exactly right. Plus what to do if you're still not sure.
The short answer: borrow a ring she already wears on her ring finger and have a jeweller measure it, or trace the inside of it and measure the diameter yourself. If you can't get a ring, let her tell you her size through a Ring Report without saying why. Everything else is an estimate, and we'll cover how to handle that too.
Ring size is the one thing most people get wrong on an engagement ring, and it's the easiest to get right if you plan a week ahead. Here's every method, honestly ranked.
First, know which finger you're sizing
Engagement rings go on the ring finger of the left hand in Canada and the US. Fingers on the two hands are often half a size apart, so a ring she wears on her right hand gets you close, not exact. If she wears a ring on her left ring finger already, that's your measurement.
Seven ways to find her size
1. Borrow a ring and have it measured
The most reliable method. Take a ring she wears on her ring finger to any jeweller. They slide it onto a sizing mandrel and read the size in about a minute, usually for free. Pick a ring with a plain, round band. A ring with a wide or thick band fits larger than a thin one, so tell the jeweller how wide the band is on the ring you're planning.
2. Trace it and measure the diameter
If you can only have the ring for ten minutes, lay it on paper and trace the inside of the band with a sharp pencil. Measure the widest point of the circle in millimetres. Match it to the table below. Do it twice and use the average.
| Inside diameter | US and Canada size |
|---|---|
| 14.9 mm | 4 |
| 15.3 mm | 4.5 |
| 15.7 mm | 5 |
| 16.1 mm | 5.5 |
| 16.5 mm | 6 |
| 16.9 mm | 6.5 |
| 17.3 mm | 7 |
| 17.7 mm | 7.5 |
| 18.1 mm | 8 |
| 18.5 mm | 8.5 |
| 19.0 mm | 9 |
3. Slide it onto your own finger
Put her ring on your finger and mark where it stops with a pen. A jeweller can size that spot on your finger. Less accurate than the first two, but it works in a pinch and you can do it in the time it takes her to shower.
4. Ask the person who would know
Her mom, her sister or a close friend may know her size, or can find out without raising suspicion. Two risks: secrets travel, and people guess. Ask how they know. "She told me once" is better than "she's about my size."
5. Check her order history
If she has ever bought a ring online, the size is in the order confirmation. If you share an account or she has mentioned a ring from a specific brand, that's your answer. Only go here if it's something you'd both be fine with.
6. Buy her a ring as a gift first
A simple ring for a birthday or Christmas does two things. You learn her size when it fits or doesn't, and you learn what she thinks of the metal and the style. Give it a few weeks before you order the real one.
7. Let her tell you, without saying why
This is the one that gets it exactly right. Most couples have talked about rings before a proposal. Her size isn't the surprise. The moment is.
The Ring Report is a short set of questions you send her. She picks her shape, setting, metal and size, and adds anything only she would know. It comes back to you as one page. It takes her about five minutes, it's free, and it answers every other question in this guide at the same time.
Things that throw sizing off
- Time of day. Fingers are smallest first thing in the morning and largest in the evening. Measure in the afternoon.
- Heat and cold. Fingers swell in summer and shrink in a Calgary January. If you measure in December, expect it to feel snug in July.
- Knuckles. If her knuckle is bigger than the base of her finger, the ring has to clear the knuckle and may spin a little. That's normal. A jeweller can add sizing beads later if it bothers her.
- Band width. Wide bands fit tighter. If you're going from a thin ring to a wide one, go up a quarter size.
Still not sure? Here's what to do
If you have two sizes in mind, go with the larger one. Sizing a ring down is easier than sizing it up, and a slightly loose ring on proposal day beats one that won't go on.
If you have nothing to go on, most women fall between size 5 and 7, and size 6 is the most common place to start. Don't guess if you can avoid it, but if you have to, that's the range.
Every OLVR ring comes with one free resize, up to three quarters of a size either way, in the first year, shipping both ways covered. So an estimate within half a size costs you nothing but a week or two. Our standard sizes run from 4 to 9.5 in half sizes. Anything outside that or a quarter size is made bespoke and is final sale, so it's worth getting measured.
Common questions
Can I use a printable ring sizer?
You can, but printers scale pages and it's easy to be off by half a size. Measuring a ring she already wears is more accurate.
Does the diamond shape change the size?
No. Size is the inside of the band. The shape and size of the stone don't affect it, but a wide band or a thick shank does.
What if the ring doesn't fit on the day?
Put it on whichever finger it fits and get it resized the week after. Nobody remembers that part of the story. Every OLVR ring includes one free resize in the first year.
What if I don't know anything else about what she wants either?
Start with our guide on how to find out what ring she wants, or skip straight to sending her the Ring Report. Her size is one of the questions.
Find out what she wants. Without asking.
Send her the free Ring Report. She picks the shape, setting and stone she actually wants, and her answers come back to you.

